|
Replaces worn cylinders for various Graco pumps in the StPro, Ultra, ES, LTS, and other Graco products. You must replace the cylinder if yours is worn beyond .004” in the inside diameter of the sleeve. This typically can be seen (or felt) at the middle of the stroke area on the inside walls of the cylinder. Also, if there are pits, scratches, waves are seem or areas that don’t look like a nice smooth surface, the sleeve must be replaced! Worn sleeves will damage the new packing/seals and cause shortened life or instant failure of your repair. This cylinder replaces the Graco #243176 or 243-176
ALWAYS check your manual for your applicaton.
APPLICATIONS:
190ES/210ES
190LTS/210LTS
Pro 230ES
Pro 270ES
Pro 270GS
Ultra 390, 395, 490, 495, 595
ST Pro units
Early 695’s.
|
